StarTech IO Card PEXUSB3S3GE 3Port PCI-Express USB3.0 Card + Gigabit Ethernet Retail


SKU: 166777 MPN: PEXUSB3S3GEUPC: 65030860796

281 in stock

This PCIe USB 3.0 card couples your peripheral and network connections into a single, scalable solution.
By combining three USB 3.0 ports and one RJ45 port onto a single card, you only need a single PCIe slot for installation, which lets you free up space for other add-ons or upgrades and get more out of your desktop or server.

Combo-card convenience and cost-savings
If you have separate cards for your USB and network connections, this versatile card overcomes the aggravation of running out of PCIe slots while helping to reduce clutter inside your PC.

This dual-purpose card is perfect for building or upgrading your computer. It helps you save money by avoiding the additional costs of purchasing separate USB 3.0 and Gigabit Ethernet adapters.

Flexible install options and legacy device support
You can rest assured this card will fit in your small form-factor system, if needed. It features a dual-profile design that makes it easy to install in either standard or low-profile cases.

The combo card makes it easy to connect peripherals such as your external hard drives or mobile devices. Plus, its backward compatible with USB 2.0 and 1.x, so you wont have to replace all of your existing USB devices.

  • Hardware
    Bus Type:PCI Express
    Card Type:Standard Profile (LP bracket incl.)
    Chipset ID:
    Renesas / NEC – PD720201 (USB 3.0)
    Realtek – RTL8153 (LAN)
  • Industry Standards:
    USB 3.0 Specification Rev. 1.0
    PCI Express Base Specification Rev. 2.0
    Intel xHCI Specification Rev. 1.0

    IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T

    IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.3x Flow Control, 802.1q VLAN Tagging, 802.1p Layer 2 Priority Encoding

  • Interface:
    USB 3.0
    RJ45 (Gigabit Ethernet)

    Port Style:Integrated on Card

  • Performance
    Auto MDIX:Yes
    Compatible Networks:10/100/1000 Mbps
    Flow Control:Full duplex flow control
    Full Duplex Support:Yes
    Jumbo Frame Support:9K max.
  • Maximum Data Transfer Rate:
    5 Gbps (USB 3.0)
    2 Gbps (Ethernet Full-Duplex)
    MTBF:1,920,042 Hours
    Type and Rate:USB 3.0 – 5 Gbit/s
    UASP Support:Yes
  • Connector(s)
    Connector Type(s):1 – PCI Express x1 Male

    External Ports:
    3 – USB 3.0 A (9 pin SuperSpeed) Female
    1 – RJ-45 Female

    Internal Ports:1 – SATA Power (15 pin) Plug

  • Software
    OS Compatibility:
    Windows 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
    Windows Server 2012, 2008 R2
    Linux 2.6.31 and up (Tested up to 3.5)
  • Special Notes / Requirements
    Note:The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5 Gbps.
    UASP (USB Attached SCSI Protocol), is supported in Windows 8, 8.1, Server 2012 and Linux kernel 2.6.37 or later. Test results were obtained using an Intel Ivy Bridge system, add-on USB 3.0 cards, a UASP-enabled enclosure, and a SATA III solid-state drive.
  • System and Cable Requirements:
    PCI Express enabled computer with an available PCI Express x1 slot or higher (x4, x8, x16)
    SATA power connector (recommended, but optional)
  • Indicators
    LED Indicators:1 – Link (Green)
    1 – Activity (Amber)

    Included in Package
    1 – 3 Port PCI Express USB 3.0 Card w/ Gigabit Ethernet
    1 – Low-Profile Bracket
    1 – Driver CD
    1 – Instruction Manual

  • Item Dimension (L”xW”xH”):
    5.59 x 6.69 x 1.18

    0.33 lb

    Warranty Information:
    2 Year Warranty

0.33 lbs


There are no reviews yet.

Be the first to review “StarTech IO Card PEXUSB3S3GE 3Port PCI-Express USB3.0 Card + Gigabit Ethernet Retail”

Your email address will not be published. Required fields are marked *

SKU: 166777 Category: MPN: PEXUSB3S3GEUPC: 65030860796