D-Link Network DGS-1510-52X SmartPro 48-Port Gigabit Switch with 4 10GbE SFP+ Retail

$1,027.15

SKU: 157078 MPN: DGS-1510-52XUPC: 790069406065

18 in stock

The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. 48 10/100/1000 Mbps port models, these switches also include four optical ports – including 2 Gigabit SFP and 2 10G SFP+ ports. The 48 port versions are also available with 4 10G SFP+ ports instead of the 2 Gigabit plus 2 10G configuration.

10G SFP+ Stacking/Uplink Ports

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Six units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS-1510 Series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting.

  • Port Standards and Functions
    IEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100BASE-TX Fast Ethernet
    IEEE 802.3ab 1000BASE-T Gigabit Ethernet
    802.3ae 10 GbE,
    IEEE 802.3x Flow Control for Full-Duplex Mode,
    Auto-negotiation
  • Number of Ports
    DGS-1510-52X: 48 10/100/1000 Mbps, 4 10G SFP+

    Network Cables
    UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)

  • Full/Half Duplex
    Full/half duplex for 10/100 Mbps and Gigabit speed

    Media Interface Exchange
    Auto or configurable MDI/MDIX

  • Performance
    Switching Capacity
    DGS-1510-52X: 176 Gbps
    Transmission Method
    Store-and-forward
    MAC Address Table
    16,000 entries per device
    MAC Address Update
    Up to 512 static MAC entries,
    Enable/disable auto-learning of MAC addresses
    Maximum 64 bytes Packet Forwarding Rate
    DGS-1510-52X: 130.95 Mpps
    Packet Buffer Memory
    DGS-1510-52X: 3 MB per device
  • Physical and Environmental
    AC Input
    100 to 240 VAC 50/60 Hz internal universal power supply
    Maximum Power Consumption
    DGS-1510-52X: 44.2 W
    Standby Power Consumption
    DGS-1510-52X: 28.6W/100V 28.9W/240V
    Smart Fan Quantity
    DGS-1510-52X: 2
    Acoustics
    DGS-1510-52X: 45.8 dB(A)
  • Physical and Environmental
    AC Input
    100 to 240 VAC 50/60 Hz internal universal power supply
    Maximum Power Consumption
    DGS-1510-52X: 44.2 W
    Standby Power Consumption
    DGS-1510-52X: 28.6W/100V 28.9W/240V
    Smart Fan Quantity
    DGS-1510-52X: 2
    Acoustics
    DGS-1510-52X: 45.8 dB(A)
  • Heat Dissipation
    DGS-1510-52X: 138.8 BTU/hr
    Diagnostic LEDs
    Power/Stacking ID/Fan (per device),
    Link/Activity/Speed (per 10/100/1000 Mbps port),
    Link/Activity/Speed (per Gigabit SFP port),
    Link/Activity/Speed (per 10G SFP+ port)
    Certifications
    CE, FCC, C-Tick, VCCI, BSMI, CCC
    Safety cUL, CB
  • Item Dimension (L”xW”xH”):
    14.4 x 21.85 x 4.0

    Weight:
    7.95 lb

    Warranty Information:
    Limited Lifetime

Weight
7.95 lbs

Reviews

There are no reviews yet.

Be the first to review “D-Link Network DGS-1510-52X SmartPro 48-Port Gigabit Switch with 4 10GbE SFP+ Retail”

Your email address will not be published. Required fields are marked *

SKU: 157078 Category: MPN: DGS-1510-52XUPC: 790069406065