D-Link Accessory DPE-301GS 1Port Gigabit PoE Splitter Retail


SKU: 175896 MPN: DPE-301GSUPC: 790069416675

30 in stock

DPE-301GS PoE Splitter

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.

The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.

PoE Injector and PoE Splitter Tandem

Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

  • PORTS:
  • PoE and Data
    Label: PoE IN
    IEEE 802.3 / 10BASE-T
    IEEE 802.3u / 100BASE-Tx
    IEEE 802.3ab / 1000BASE-T
    IEEE 802.3af / 802.3at
    Half/full-Duplex operation
  • Data
    Label: LAN OUT
    IEEE 802.3 / 10BASE-T
    IEEE 802.3u / 100BASE-Tx
    IEEE 802.3ab / 1000BASE-T
    Half/full-Duplex operation
  • Temperature
    Operating: 32 F to 122 F / 0 to 50 C
    Storage: -22 F to 158 F / -30 C to 70 C
  • Humidity
    Operating: 5% to 95% RH
    Storage 5% to 95% RH
  • Power Consumption
    Maximum: 32.4 Watts
  • LED Indicators
    Blue: Power On
    Green: Link On
  • Switchable Output Voltage
    5V DC, 2.5A max
    9V DC, 2A max
    12V DC, 2A max 100 – 240V, 50/60 Hz
  • Included Power Adapter Cables
    5.5mm Male to 5.5mm Male
    5.5mm Male to 3.8mm Male
  • Standards
    IEEE 802.3af, IEEE 802.3at
  • Emissions (EMI) and Safety Certifications
    Certifications: CE, FCC, VCCI, RCM, RoHS
  • Item Dimension (L”xW”xH”)
    5 x 3 x 1

    1.00 lb

    Warranty Information
    1 Year Limited

1 lbs


There are no reviews yet.

Be the first to review “D-Link Accessory DPE-301GS 1Port Gigabit PoE Splitter Retail”

Your email address will not be published. Required fields are marked *

SKU: 175896 Category: MPN: DPE-301GSUPC: 790069416675