Space Versatility

Not your typical 5.25” mobile rack, the ExpressCage MB322SP-B *takes two 2.5” SATA/SAS HDD/SSD of 7mm to 9.5mm height and converts them into two hot-swap drive bays. It also includes 3.5” slot for a 3.5” device or 3.5” hard drive for various build options.

Note: 2.5” SAS HDD/SSD requires SAS host, and MB322SP-B supports SAS single channel only.

With the extra slot, users can expand their storage by adding a 3.5” HDD or a ToughArmor MB992SK-B for two more 2.5” hot swap bays. The 3.5” slot is also compatible with an assortment of 3.5” form factor devices from USB 3.0 hubs to fan speed controllers. This versatility makes the MB322SP-B an essential tool for a wide range of power users and system builders looking to add variability to their computer build.

• Model Number :
  MB322SP-B

  Color :
  Black

  Host Interface :
  2 x 7pin SATA

• Drive Fit :
  1 x 3.5″ device or 1 x 3.5″ hard drive
  2 x 2.5″ SATA or SAS (single channel) HDD/SSD

  Compatible 2.5″ Drive Heights :
  7mm, 9.5mm

  Device Fit :
  Single 5.25″ half height device bay

• Transfer Rate :
  Up to 6 Gb/sec. (depending on hard drive speed)

  Power Input :
  Single 15pin SATA power port

  Insertand Extract connection Via :
  Direct SAS/ SATA hard drive connection

  Structure :
  Plastic and metal

• Power Indicator :
  Solid blue LED

  HDD Access Indicator :
  Blinking blue LED

  Package Contents :
  Device, user manual, screws

• Item Dimension (L”xW”xH”):
  6.5 x 6.1 x 2.17

  Weight:
  28.08 lb

  Warranty Information:
  3 years

Utilize the Standard 5.25 Bay
Our ExpressCage series is the latest addition to our lineup of ICY DOCK products and is catered to system builders and power users that require much more from their 5.25 bay. The MB324SP-B utilizes that 5.25 standard bay and converts it into 4 x 2.5 hot-swappable bays with support of 2.5 SATA and SAS HDD/SSD between 7mm to12.5mm in height. Our versatile enclosure supports SATA III 6Gb/s and single channel SAS (Requires SAS Controller Card). Extremely power efficient, the ExpressCage MB324SP-B can power all 4 drives with a single 15pin SATA power connector which can free up cable clutter and simplify your system build. In addition, our active power feature keeps your enclosure powered down until a drive is inserted minimizing energy usage.

• Model Number :
  MB324SP-B
• Color :
  Black
• Host Interface :
  4 x 7pin SATA
• Drive Fit :
  4 x 2.5″ SATA or SAS (single channel) HDD/SSD
• Compatible Drive Heights :
  7mm, 9.5mm 12.5mm
• Device Fit :
  Single 5.25″ half height device bay
• Transfer Rate :
  Up to 6 Gb/sec. (depending on hard drive speed)
• Power Input :
  Single 15pin SATA power port
• Insert Extract connection Via :
  Direct SAS/ SATA hard drive connection
• Structure :
  Plastic and metal
• Drive Cooling :
  40mm rear cooling fan
• Fan Speed Control :
  High / Low / Auto jumper
• Power Indicator :
  Solid blue LED
• HDD Access Indicator :
  Blinking blue LED
• Weight
  1.10
  Item Dimension
  6.5 x 6.1 x 2.17
  Warranty Information
  3 Years

Efficient Space Use

The MB991SK-B is perfect for use in industrial PCs, SMB SFF servers, mobile DVR systems, or even home servers. These systems tend to use components that provide the needed features, in the smallest form factor available. The ability to house one SATA SSD or HDD in a single 3.5” bay makes it a valuable asset in specific applications such as, integration into an industrial imaging or medical device.

• Model Number :
  MB991SK-B

  Color :
  Matt Black

  Host Interface :
  Single 7pin SATA

• Drive Fit :
  Single 2.5″ SATA I/ II/ III HDD/ SSD (7-15mm Height Drive)

  Drive Bay :
  3.5″ floppy drive bay

  Transfer Rate :
  Up to 6 Gb/sec. (depending on hard drive speed)

• Power Input :
  Single 15pin SATA power port

  Insert Extract connection Via :
  Direct SATA hard drive connection

  Structure :
  Full Metal

• Drive Cooling :
  Metal heat dispersion

  LED Indication :
  Device Power and Drive Activity

  LED Color :
  Green : Device Power Amber : Drive Activity

• Item Dimension (L”xW”xH”):
  5.32 x 4 x 1.01

  Weight:
  1 lb

  Warranty Information:
  3 years

High Capacity RAID Storage in Limited Space
Utilizing the standard 5.25 bay form factor, the compact design allows the enclosure to be used in various applications, catering to a wide audience. The MB996SP-6SB excels for use in advanced RAID applications such as building dual RAID 5 arrays or high performance 4 drives in RAID 0 plus RAID 1 array for back up, all in a single 5.25 device bay. The MB996SP-6SB is extremely useful for powerful small servers, gaming rigs, home servers or HTPCs due to its high capacity and space saving design. It is also perfect for users who needs non-RAID JBOD storage and save different contents in different drive locations. It supports wide-range of applications which is the true value of the MB996SP-6SB.

Rock Solid Construction
Making sure your drives or expensive SSDs are in good hands and last as much as possible is carefully considered to any build and design. The MB996SP-6SB is capable of holding up in the various environments, with the heavy duty full metal construction in the entirety of the body and its smaller components.

The metal material used grants heat dissipation transfer from the hard drives to the backplane cage. Lastly, Anti-Vibration Technology (AVT) and EMI grounding are used to ensure a stable environment for the hard drives or SSDs used, dramatically improving reliability.

• Model Number :
  MB996SP-6SB

  Color :
  Matt Black

  Host Interface :
  6 x 7 pin SATA

  Drive Fit :
  6 x 2.5″ SATA I / II / III SSD or HDD (9.5mm thickness)

• Drive Bay :
  Single 5.25″ half height device bay

  Transfer Rate :
  Up to 6 Gb/sec. (depending on hard drive speed)

  Insert and Extract connection Via :
  Direct SATA hard drive connection

• Structure :
  Aluminum and SECC

  Device Power :
  Dual 4 pin Molex power

  Drive Cooling :
  40mm rear cooling fan with fan switch (High/ Low/ Off)
  Metal heat dispersion

• Power Indicator :
  Solid Green LED

  HDD Access Indicator :
  Flashing Amber LED

• Item Dimension (L”xW”xH”):
  6.7 x 6.1 x 2.17

  Weight:
  1.8 lb

  Warranty Information:
  3 Years

Slimmed Down Design
The MB153SP-B has been redesigned to be a lighter module, while maintaining the same level of quality, build, and service youd expect from an Icy Dock product. While the design has gone through some changes, the space saving design is still established. The backplane module allows up to 3 x 3.5 SATA III hard drives, while only consuming two 5.25 bays. The module has also been redesigned for the type of power connector accepted. 15 pin SATA power is used to provide better accessibility for various host systems.

Efficient Cooling
Along with being a lighter package, the cooling has been improved to provide better air flow to your hard drives. The MB153SP-B uses a full metal body that allows for the best heat dissipation possible in various types of applications. In addition, our enhanced direct air flow design allows the included cooling fan to raise its efficiency to cool down your hard drives, by closing and rerouting any side vents to route incoming air directly to the cooling fan, as well as sealing any vents around the fan for better cooling efficiency. In addition, the backplane logic PCB has larger vents in key areas to allow more air to flow into and exit the MB153SP-B, making it an ideal system to store and cool your hard drives.

• Model Number :
  MB153SP-B

  Color :
  Black

  Drive Fit :
  3 x 3.5 SATA 1.5 / 3 / 6 Gbit/s hard drives

  Drive Bay :
  2 x 5.25″ half height device bay

• Host Interface :
  3 x 7 pin SATA port

  Power Input :
  2 x 15pin SATA Power

  Transfer Rate :
  Up to 6Gb/sec. (depending on hard drive speed)

• Insert Extract connection via :
  Direct SATA hard drive connection

  Structure :
  Metal body w/ partial plastic

• Drive Cooling :
  Replaceable 80 x 80 x 25mm cooling fan
  Compatible with most 80mm fans with 2pin/ 3pin connector
  Metal chassis heat dispersion
• Power Indicator :
  Solid Green LED (Power On)

  HDD Access Indicator :
  Flashing Amber LED

• Item Dimension (L”xW”xH”):
  6.2 x 8.6 x 11.6

  Weight:
  3.73 lb

  Warranty Information:
  3 Years

The MB994SP-4S utilizes our brand new EZ Slide Mini Trays, making drive interchangeability and maintenance completely hassle free. The trays are built using full metal so that they are durable for many lifetimes, but will not weigh you down when transporting your data from system to system. And featuring a full cage design, the added top drive cover provides added protection while moving the drive. The trays are also designed to accommodate 9.5mm, 12.5mm, and 15mm drives giving you the ultimate universal 2.5″ hot swap bay.

Utilizing its small form factor, The MB994SP-4S is perfect for use in industrial PCs, servers, or any small form factor case where 5.25” bays are limited and large drive capacity is needed, especially compact RAID 5 systems. It is built to function in the most demanding environments including military and law enforcement deployment, as well as manufacturing conditions such as embedded control systems and factory automation systems. The heavy metal design makes it ideal for placement in rugged environments.

• Model Number : MB994SP-4S

  Color : Matt Black

  Host Interface : 7 pin SATA x 4

• Drive Fit : 2.5″ SAS or SATA I /II/III HDD / SSD x 4

  Drive Bay : 5.25″ Bay x 1

• Transfer Rate : Up to 6 Gb/sec. (depending on hard drive speed)

  Insert and Extract connection Via : 15 pin direct hard drive connection

• Structure : SECC

  Drive Cooling : 40mm rear cooling fan x 2 and metal heat dispersion

• LED Indication : Device Power and Drive Activity

  LED Display Color : Green : Device Power Amber : Drive Activity

• Item Dimension (L”xW”xH”):
  7.44 x 6.13 x 2.19

  Weight:
  1.94 lb

The MB991IK-B also utilizes our brand new EZ Slide Mini Trays, making drive interchangeability and maintenance completely hassle free. The trays are built using full metal so that they are durable for many lifetimes, but will not weigh you down when transporting your data from system to system. And featuring a full cage design, the added top drive cover provides added protection while moving the drive. The trays are also designed to accommodate 9.5mm, 12.5mm, and 15mm drives giving you the ultimate universal 2.5″ hot swap bay.

Utilizing its small form factor, The MB991IK-B is perfect for use in industrial PCs and mobile DVR systems. It is built to function in the most demanding conditions including military and law enforcement deployment, as well as manufacturing conditions such as embedded control systems and factory automation systems. The heavy metal design makes it ideal for placement in rugged environments. It also includes a key lock to safeguard sensitive data such as security recordings.

• Model Number :
  MB991IK-B
• Color :
  Matt Black
• Host Interface :
  7 pin SATA x 2
• Drive Fit :
  2.5″ SAS or SATA I /II HDD / SSD x 1
• Drive Bay :
  3.25″ Bay x 1
• Transfer Rate :
  Up to 6 Gb/sec. (depending on hard drive speed)
• Insert Extract conection Via :
  15 pin direct hard drive connection
• Structure :
  SECC
• Drive Cooling :
  Metal heat dispersion
• LED Indication :
  Device Power Drive Activity
• LED Color : Green :
  Device Power Amber : Drive Activity
• Dimension (L x W x H) :
  5.32″ x 4.00″ x 1.01″
• Weight :
  0.88 lbs
• Warranty Information:
  3 Years