• Quickly adds a Gigabit Ethernet port to your laptop system through USB-C connection

• Compact and light weight design makes it a perfect LAN accessory while on-the-go, provides instant wired Ethernet connection

• USB 3.0 SuperSpeed interface ensures high performance packet transfer rate

• Features full duplex with flow control and half duplex with back pressure operation

• Supports Wake-on-LAN, IEEE 802.3az (Energy Efficient Ethernet) and Jumbo Frame

• Built-in power and data diagnostic LEDs

• Specifications
  Chipset: Realtek RTL8153
  Compliant with Universal Serial Bus 3.0 Specification and backward compatible with USB 2.0
  Supports full duplex operation with IEEE 802.3x
  Compatible with IEEE 802.3, 802.3u
  Supports IEEE 802.3az (Energy Efficient Ethernet)
  Supports IEEE 802.1Q VLAN tagging
  Supports IPv4/IPv6 packet Checksum Offload Engine to reduce CPU loading
  Supports IEEE 802.1P Layer 2 Priority Encoding
• Color
  Black
• Housing material
  Plastic
• Connectors
  1x USB-C, Male
  1x 8-pin, RJ45, Network, Female
• Environmental conditions
  Operating temperature: 32 to 140 degrees F
  Storage temperature: -4 to 140 degrees F
  Relative humidity: 5% to 85% RH (non-condensing)
• Certifications/Standards
  FCC, CE, RoHS
• Item Dimension (L inchxW inchxH inch)
  4 x 6 x 2
• Weight
  1.00 lb
• Warranty Information
  1 Year

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that donâ€t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.

The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.

PoE Injector and PoE Splitter Tandem

Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

• PORTS:
• PoE and Data
  Label: PoE IN
  IEEE 802.3 / 10BASE-T
  IEEE 802.3u / 100BASE-Tx
  IEEE 802.3ab / 1000BASE-T
  IEEE 802.3af / 802.3at
  Half/full-Duplex operation
  CSMA/CD
• Data
  Label: LAN OUT
  IEEE 802.3 / 10BASE-T
  IEEE 802.3u / 100BASE-Tx
  IEEE 802.3ab / 1000BASE-T
  Half/full-Duplex operation
  CSMA/CD
• PHYSICAL and ENVIRONMENTAL:
• Temperature
  Operating: 32 F to 122 F / 0 to 50 C
  Storage: -22 F to 158 F / -30 C to 70 C
• Humidity
  Operating: 5% to 95% RH
  Storage 5% to 95% RH
• Power Consumption
  Maximum: 32.4 Watts
• LED Indicators
  Blue: Power On
  Green: Link On
• DC POWER OUT:
• Switchable Output Voltage
  5V DC, 2.5A max
  9V DC, 2A max
  12V DC, 2A max 100 – 240V, 50/60 Hz
• Included Power Adapter Cables
  5.5mm Male to 5.5mm Male
  5.5mm Male to 3.8mm Male
• PoE FEATURES:
• Standards
  IEEE 802.3af, IEEE 802.3at
• Emissions (EMI) and Safety Certifications
  Certifications: CE, FCC, VCCI, RCM, RoHS
• Item Dimension (L”xW”xH”)
  5 x 3 x 1

  Weight
  1.00 lb

  Warranty Information
  1 Year Limited

D-Linkâ€s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.

The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.

The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.

• PORTS:
• PoE and Data
  Label: PoE OUT
  IEEE 802.3 / 10BASE-T
  IEEE 802.3u / 100BASE-Tx
  IEEE 802.3ab / 1000BASE-T
  IEEE 802.3af / 802.3at
  Half/full-Duplex operation
  CSMA/CD
• Data
  Label: LAN IN
  IEEE 802.3 / 10BASE-T
  IEEE 802.3u / 100BASE-Tx
  IEEE 802.3ab / 1000BASE-T
  Half/full-Duplex operation
  CSMA/CD
• PHYSICAL and ENVIRONMENTAL:
• Temperature
  Operating: 32 F to 122 F / 0 to 50 C
  Storage: -22 F to 158 F / -30 C to 70 C
• Humidity
  Operating: 5% to 95% RH
  Storage 5% to 95% RH
• Power Consumption
  Maximum: 32.4 Watts
• LED Indicators
  Blue: Power On
  Green: Link On
• AC/DC Power Adapter
  AC Input: 100 to 240V 50/60Hz
  DC Output: 54V /06A
  Power Jack: 5.5mm (EIAJ-4) I-Type
• PoE FEATURES:
• Standards: IEEE 802.3af, IEEE 802.3at
• Power Output
  54V +/-2V 600mA
  32.4 Watts Maximum
• Emissions (EMI) and Safety Certifications
  Certifications: CE, FCC, VCCI, RCM, RoHS, BSMI
• Item Dimension (L”xW”xH”)
  4 x 6 x 8

  Weight
  2.00 lb

  Warranty Information
  1 Year Limited

• Intended Application
  Connects a USB computer/server to a B070 / B072-Series Cat5 KVM Switch

  Model Type
  Interface Modules

• CONNECTIONS
  Connector A:RJ45 (FEMALE)
  Connector B:HD15 (MALE)
  Connector C:USB A (MALE)
• Item Dimension (L”xW”xH”):
  3.6 x 1.6 x 0.9

  Weight:
  0.2 lb

  Warranty Information:
  1-year limited warranty