1. Single socket H4 (LGA 1151) supports
Intel® Xeon® processor E3-1200 v5,
Intel® 6th Gen. Core™ i3 series,
Intel® Celeron® and Intel® Pentium®
2. Intel® C236 chipset
3. Up to 64GB Unbuffered ECC UDIMM DDR4 2133MHz; 4x DIMM slots
4. Expansion slots:
1 PCI-E 3.0 x8 (in x16),
1 PCI-E 3.0 x8,
1 PCI-E 3.0 x4 (in x8)
5. Quad GbE LAN with Intel® i210-AT
6. 8x SATA3 (6Gbps) via C236,RAID 0, 1, 5, 10
7. I/O: 1x VGA, 2x COM, TPM 1.2 header
8. 2x SuperDOM with built-in power
9. 5x USB 3.0 (2 rear + 2 via header +1 Type A), 6x USB 2.0 (2 rear + 4 via headers)
10. M.2 NGFF connector
11. Support Intel VHD with selected CPU
- Form Factor
microATX - CPU
Single Socket H4 (LGA 1151) supports:
Intel Xeon processor E3-1200 v5,
Intel 6th Gen CoreTM i3,
Intel Pentium,
Intel Celeron processors
CPU TDP up to 80W - Memory Capacity
4x 288-pin DDR4 DIMM slots
Up to 64GB DDR4 ECC UDIMM - Memory Type
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs - DIMM Sizes
16GB, 8GB, 4GB - Memory Voltage
1.2 V - Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory) - Chipset
Intel C236 chipset - SATA
SATA3 (6Gbps) via C236 controller
RAID 0, 1, 5, 10 support - IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC - Network Controllers
Quad Intel I210-AT Gigabit Ethernet LAN ports
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output - Graphics
ASPEED AST2400 BMC - Input / Output
SATA : 8x SATA3 (6Gbps) ports ,
LAN : 4x RJ45 Gigabit Ethernet LAN ports , 1x RJ45 Dedicated IPMI LAN port
USB : 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A) , 6x USB 2.0 ports (2 rear + 4 via header)
Video : 1x VGA port
Serial Port / Header : 2x COM ports (1 rear, 1 header)
SuperDOM : 2x SuperDOM (Disk on Module) ports with built-in power
TPM : 1x TPM 1.2 20-pin Header - Expansion Slots
1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 3.0 x8 slot
1x PCI-E 3.0 x4 (in x8) slot - M.2
Interface : PCI-E 3.0 x2
Form Factor : 2280 - BIOS Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.7.1
UEFI 2.3.1
RTC (Real Time Clock) Wakeup - Software
Intel Node Manager
IPMI 2.0 with KVM support
NMI
Watch Dog
SuperDoctor 5 - Power Configurations
ACPI Power Management
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery - Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. - FAN
Total of 5 fan headers supporting up to 5 fans
5 fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Reviews
There are no reviews yet.